solidstone, natural stone treatment
SOLIDSTONE | Natural stone treatment
Consolidating anti-dust substance for clear stones
What it is used for
Solidstone is especially good for increasing the surface hardness of "soft" stone or those which produce dust. It therefore lends itself for the treatment of soft or high absorption natural stone which require hardening, oil permeability, or abrasion resistance. It is a solution with non-yellowing polyurethane resins which harden due to humidity. Given its high level of fluidity and penetrating capacity the product is also suitable for use with low porosity stone.
Strong points
• Excellent penetration with non-film generating support of the product (disappearing effect).
• Fast and deep hardening of the surfaces even at low temperatures (up to +3 °C).
• The stone is greatly hardened and given abrasion resistance, as well as a high chemical resistance to water, solvents, alkalis and chemicals in general.
• No yellowing of the product due to sunlight exposure.
How to use the product
Remove dust and any remaining deposits on the surface by washing thoroughly with cleanstone or detergents for hard surfaces. Rinse thoroughly and completely remove the excess water, making sure that there is no stagnant water in the area to be treated. After 1-2 days of drying, apply Solidstone using a roller or brush in a uniform manner, avoiding accumulations of product that may alter the appearance of the surface because of the product’s improper aging. It can be applied in two (or more) hands even over the previous hand that is still wet, with an interval of maximum one hour. If it applied vertically, proceed with various hands from 0.15 to 0.2 kg/m2 at sufficient time intervals which allow the solvent to evaporate completely.
Types of stone recommended
All natural stones
Consumption
Strictly depends on the porosity of the stone: ranging from a minimum of 10 m2 / litre on porphyry or other similar stone to a maximum of 0.5 m2 / litre on very porous stones (penetration of more than 2 cm in three or four hands)
Surfaces on which it application is recommended
Shiny surfaces, polished surfaces
Code | Description | |
---|---|---|
S-SOLIDSTONE-LT25 | Light colours strengthening treatment for natural stone |
Frost | Compression | Splipping | Absorption | Abrasion |
---|---|---|---|---|
Consumption | 0,15-0,20 kg/m2 |
Standard packaging | 25 liters tank |
loading...
Description: Acid disinctusting for non polished natural stone
|
Description: Dry aestethic semi-polishing protective treatment for indoor installation
|
Description: Stainproof and acidproof invisible waterproofer for natural stone
|
Description: Dry aestethic polishing protective treatment for indoor installation
|
Description: Dry aestethic polishing protective treatment for indoor installation
|