epoxyfuga, sealant

Two component epoxy sealant

What it is used for

Epoxyfuga is a two-component high performance epoxy sealant for natural stone paving joints to be used in a liquid state and subsequently hardened by atmospheric humidity. It allows the laying of paving for driveways used even by heavy vehicles and is aesthetically unobtrusive and relatively easy to lay. It has a high adhesion to all substrates, so that can be used for bonding natural stone tiles and many other different types of building artifacts when you want to give bonding special mechanical and chemical resistance.

Strong points

• Withstands even heavy traffic and busy

• Rapid aging (24 hours)

• Can be used in high humidity conditions

• Absorbs thermal expansion and vibration levels

• Durable

• Also resists mechanical sweepers, frost, heat, acids and salt

• Easy to use

• Facilitates the maintenance of underground facilities: artifacts that are removed can be recycled.

• Better technical characteristics than sand sealing, with cement or tar grout

• Resistant to acids

How to use the product

The joints to be sealed are prepared by removing all substances that could prevent adhesion, such as oils, grease, dust, cement adhesives, etc. It is not necessary to any type of primer in the gaps that need to be filled, new and unknown materials are used. Pour Epoxyfuga component A into component B and mechanical stir until a smooth paste is obtained. Proceed immediately with the laying of the grout about 40-45 minutes after mixing the components, at 20 °C.

Recommended use

Excellent for high traffic use areas (vehicular roads, squares, etc.)

Consumption

Indicative yield of 3-4 kg per m2 (for type 8/10 cm size cubes), for variable tiles depending on the size of the joints and of the inert materials used to saturate them.

Bedding

splitflex natural stone or gravel with a grain size 3/6mm

Usage guidelines

Urban and residential finishing, refurbishment of historic centres