cleanstone
Acidic detergent for unpolished natural stone
What it is used for
Cleanstone is used for the final washing of paving and natural stone surfaces: processing residues, efflorescence, grout overspills, and dirt. The product has a medium acidity level and allows scaling without strongly attacking the stonework, especially cement and metal parts.
Strong points
• Does not emit harmful fumes to the operator and the environment
• It does not alter the appearance and the colour of the stone
• Cleans without attacking
• Will not damage joints, aluminium profiles and steel elements (hoods, ducts)
• It is very versatile: it is used on all types of stone
• Cleans and descales
How to use the product
The product must be diluted. Apply two coats of Cleanstone at a minimum of 6 hour intervals on clean and dry paving laid at least 30 days beforehand. Dilute the product with water in a ratio of 1:5 to 1:10 depending on the stone and the surface. The treatment thus obtained can be walked on not earlier than 24 hours at 20 °C. The preferred application method is undoubtedly the Mop applicator in order to prevent the formation of excessive foaming in the finishing phase. For large areas you can apply it using a low pressure spray followed by sweeping with an applicator
Consumption
Indicative yield of 20-35 m2 / litre
Surfaces on which it application is recommended
Unpolished surfaces
Types of stone recommended
All natural stones