Trentinian Porphyry

Natural surface clogs are obtained from thin, hollow floor slabs, which are sawn to further reduce their thickness to 1.5/2.5 cm. Clogs with machined surfaces, which are instead derived from blocks...

Kerbing corners are laways used in pairs, at the end of driveways, or to connect access points.

Obtained by cutting tiles, this product is mainly used for paving surfaces on steep slopes. Such as ramps for access to garages. Also, due to its uneven surface, it is used to cover pillars, stone...

Delgorsa® Trentinian processed porphyry products with natural or flamed tops are particularly used for residential housing where the exclusive and modern look of the materials is important in...

Delgorsa® Trentinian processed porphyry products with natural or flamed tops are particularly used for residential housing where the exclusive and modern look of the materials is important in...

Delgorsa® Trentinian porphyry kerbs are particularly used in urban and residential environments on pavements, steps and flower beds, as well as to delimit surfaces and paving. The various...

Delgorsa® Trentinian processed porphyry products with natural or flamed tops are particularly used for residential housing where the exclusive and modern look of the materials is important in...

The overflow drains are made from thick slabs by sawing, shaping and subsequent hammering on the surface, creating a cavity on the length of the slab of approximately 2 cm for the collection of...

The drains are turned into overflow drains with the addition of slits for the discharge of rainwater.

Porphyry risers may have natural surfaces when they are made from flat and thin hollow slabs with machined surfaces, or sawn off blocks (with the exception of flat, semi-gloss surfaces obtained...

Natural surface tiles, which are produced by squaring slabs extracted from the quarry, are processed or by mechanically compressed (shearing), thus creating broken tiles orthogonally to the surface...

Natural surface tiles, which are produced by squaring slabs extracted from the quarry, are processed or by mechanically compressed (shearing), thus creating broken tiles orthogonally to the surface...

What is normally meant by mosaic or Palladian are irregular slabs directly selected from quarry material. Despite being a material which allows low cost application solutions, the Delgorsa®...

The paving block, which is a parallelepiped shape, has a natural upper face with parallel sides and cut off kerbs, generally orthogonal to the plane or slightly undercut. Historically used for...

Porphyry cubes are pavement elements that are almost of a cubic shape obtained the mechanical splitting of quarry slabs. The product therefore has natural surfaces or with slits (depending on the...