Odorizzi logo
 

Flexyfuga®

Flexyfuga is a polymeric, one-pack, high performance sealant for natural stone paving which is used liquid and hardens thanks to the atmospheric moisture. It allows to realize even heavy traffic areas, it is aesthetically extremely non-invasive and easy to use. The product can be used to refix unglued slabs or be poured into the setts interstices to block them. Make sure that to have an adequately dry surface before proceeding.

Advantages
Excellent for heavy trafficked areas
• Excellent for heavy traffic areas.
• 24 hours setting.
• Dilations and vibrations absorbing.
• Unalterable in time.
• Mechanical sweepers, frost, heat, acid and salt action resistant.
• Easy to use
• Better technical features comparing to sand, concrete and tar sealing.
• Wet version for high dampness jobsites and areas.


Application
For a correct use, place the paving stones Splitflex (or on 3/6 natural stone chipping). To obtain a draining bed, use clean and dry 2/4 Splitflex chipping, no concrete or sand: this would compromise the final result. After that, compact the paving and proceed with the sealing with Flexyfuga by pouring it into the joints. The product will soak in deeply and make up a resistant but flexible structure.

More information
Filter product mark
Description: Polyurethane one-pack sealant
stone-evolution
Description: Paving and walling joints sealant
stone-evolution
Description: Paving and walling joints sealant
stone-evolution
Description: Water-hardening non elastic sealant for expansion joints and paving
stone-evolution
Description: Polyurethane one-pack sealant
stone-evolution
Page of 3 >>