flexyfugacis, sealant
FLEXYFUGACIS | sealant
Single-component sealing polymer
What it is used for
Flexyfuga is a single-component high-performance polymeric sealant for natural stone paving joints used in a liquid state and hardened by atmospheric humidity. It allows the laying of paving for driveways used even by heavy vehicles and is aesthetically unobtrusive and relatively easy to lay. The product can be used as an adhesive for low-cut slabs or cast in the interstices of the blocks to fill the gaps. Before use check that the pavement is not wet or excessively humid.
Strong points
• Withstands even heavy and intense traffic.
• Rapid aging (24 hours).
• Absorbs thermal expansion and vibration levels.
• Durable.
• Also resists mechanical sweepers, frost, heat, acids and salt.
• Easy to use.
• Facilitates the maintenance of underground facilities: artifacts that are removed can be recycled.
• Better technical characteristics than sand sealing, with cement or tar grout.
How to use the product
For proper laying with Flexyfuga sealant the artifacts must be laid on Splitflex (natural stone or gravel type 3/6 mm) bedding. In order to obtain bedding with drainage, clog the joints of the pavement with clean and dry Splitflex size 2/4 mm gravel. Do not use cement or sand, because this would adversely affect the final result. After compacting the paving in accordance with the type of material used, proceed with sealing by spreading Flexyfuga for casting in the joints using the proper equipment. Flexyfuga penetrates deeply, thereby making a resistant and elastic structure and at the same time making it particularly suitable for surfaces with heavy traffic.
Recommended use
Excellent for high traffic use areas (vehicular roads, squares, etc.)
Consumption
Indicative yield of 1kg per m2 (for 8/10 cm size cubes)
Bedding
splitfuga natural stone or gravel with a grain size of 3/6 mm
Usage guidelines
Urban and residential finishing, refurbishment of historic centres
Code | Description | |
---|---|---|
S-FLEXYFUGACIS | Polyurethane one-pack sealant |
Frost | Compression | Splipping | Absorption | Abrasion |
---|---|---|---|---|
Consumption | about 1 kg/m2 for 8/10 cm cobbles |
Standard packaging | 1000 kg tank |
loading...