betonflex, subgrade
BETONFLEX | Subgrade
C2 T and S2 class single component adhesive
What it is used for
Betonflex is a single-component adhesive consisting of cement, graded sand, resins and special additives. It is prepared by mixing it with the sole addition of water before laying. At this stage the product is transformed into a cement mortar with improved characteristics, which is slip resistant, has a high open time, is highly deformable, easy workability and, after aging, has an excellent resistance to frost. It is designed for adhesive thicknesses of up to 1.5 cm, and for small, medium and large format tiles.
Strong points
• It is an adhesive for universal application.
• It is ideal for both internal and external paving.
• Resistant to frost.
• It can be laid over existing paving.
• High adhesion and flexibility.
• Highly deformable.
How to use the product
Thoroughly clean the area and remove loose particles, oils, grease, paint and anything that can prevent proper adhesion of the glue to the support. Pour the mixing water in a suitable container. Mix at low speed until you obtain a smooth paste without lumps. Spread the adhesive on the surface in a thin and uniform layer with the smooth side of the spatula in order to make absorption uniform, and especially, to fully exploit the product’s entire open time (30 minutes). Proceed with laying the tiles and apply pressure to improve contact with the adhesive and the widest wetting of the surface. For large format tiles spread on a double layer for external areas, which will be useful to resist frequent winter frosts.
Use
Excellent for external and interior pedestrian paving.
Consumption
Consumption is highly variable: from 3.75 kg/m2 to achieve a minimum thickness bonding of 3 mm to 11.25 kg for 9 mm and so on.
Usage guidelines
Residential and shopping areas
Recommended sealing
colourfuga, betonsealfuga
Code | Description | |
---|---|---|
S-BETONFLEX | High perfomances two-pack c2 F E S1 class grey glue for high thicknesses |
Frost | Compression | Splipping | Absorption | Abrasion |
---|---|---|---|---|
Consumption | 2-5 kg/m2 |
Delivered goods | EX WORKS (ALBIANO) |
Standard packaging | 25 kg bags on 56 bags pallet |
loading...