Odorizzi logo
 

FlexyFuga

Single-component polymer sealing

What it is used for

Flexyfuga is a single-component high-performance polymeric sealant for natural stone paving joints used in a liquid state and hardened by atmospheric humidity. It allows the laying of paving for driveways used even by heavy vehicles and is aesthetically unobtrusive and relatively easy to lay. The product can be used as an adhesive for low-cut slabs or cast in the interstices of the blocks to fill the gaps. Before use check that the pavement is not wet or excessively humid.

Strong points

• withstand even heavy traffic and busy.

• Rapid aging (24 hours).

• Absorbs thermal expansion and vibration levels.

• Durable.

• Also resists mechanical sweepers, frost, heat, acids and salt.

• Easy to use.

• Facilitates the maintenance of underground facilities: artifacts that are removed can be recycled.

• Better technical characteristics than sand sealing, with cement or tar grout.

How to use the product

For proper laying with Flexyfuga sealant the artifacts must be laid on Splitflex (natural stone or gravel type 3/6 mm) bedding. In order to obtain bedding with drainage, clog the joints of the pavement with clean and dry Splitflex size 2/4 mm gravel. Do not use cement or sand, because this would adversely affect the final result. After compacting the paving in accordance with the type of material used, proceed with sealing by spreading Flexyfuga for casting in the joints using the proper equipment. Flexyfuga penetrates deeply, thereby making a resistant and elastic structure and at the same time making it particularly suitable for surfaces with heavy traffic.

[Please, accept cookies]

Recommended use

Excellent for high traffic use areas (vehicular roads, squares, etc.)

Consumption

Indicative yield of 1kg per m2 (for type size cubes in 8/10 cm)

Bedding

splitfuga natural stone or gravel with a grain size 3/6 mm

Usage guidelines

Urban and residential finishing, refurbishment of historic centres

OP-FLEXYFUGA.pdf

More information